9th Auto Guangzhou 2011
The 9th Auto Guangzhou is the second car show that I had been to last year here in China. It was held last November 22-28, 2011 at the China Import and Export Fair Complex in Guangzhou. This one is far bigger than the Shenzhen-Hongkong-Macao International AutoShow.
Comparison of cheap macro set-ups (Reverse Ring Method)
I found this photography forum and I was amazed by the way they take macro photos with very simple tools particularly the Reverse Ring Coupler.
So I bought one myself to try it and also bought a 52mm-52mm ring coupler for stacking lenses, another cheap method for macro/closeup photography. But prior to that I already owned an automatic extension tube. During shoots I am usually confused on what to use the extension tubes (ET) or the Reverse Ring (RR). Since my primary objective is to take macro shots whose magnification should be 1:1 or greater, my choice between the two would be in their magnifying capabilities.
Unfortunately for reverse ring method I haven’t found a formula to compute for its magnification factor. But for ET I found magnification formulas on numerous websites. To solve the magnification factor for ET you just divide the ET size with focal length of the lens. So if you have two ET stacked together (36mm + 20mm) for a total of 56mm and the focal length of your lens is 55mm then you would get a magnification of (56/55 =) 1.018x . Using the stacked ET and a shorter focal length like 24mm would give you an impressive magnification factor of (56/24 =) 2.333x .Unfortunately in ET as well in RR method the higher the magnification you use the shorter the DOF (depth of field) you can work with. You will have to find a way to overcome this problem. Focusing distance is also a problem wherein sometimes your lens is almost touching the subject.
Since I can’t find a formula for the RR method, I have no choice but to take an actual shot and measure its size on the photo. For a 1:1 magnification you must fill the frame with a size same as the sensor of the camera. So for my Nikon D3000 camera with an APS-C sensor a subject with a size if 23.6mm x 15.8mm or lower must fit the whole frame.
I tried and tested different methods like the RR, ET and the stacked lens. For my very crude test setup, I shot a photo of a ruler using different method.

Midway on my test I realized I was shooting the english side of the ruler instead of the metric. So instead of repeating the previous shoots I continued and I just converted the ruler reading in metric. I used a Nikon D3000 camera with a YN460-II Speedlite+diffuser.
1st setup: D3000+RR+ reversed Kit Lens (18-55mm)
@ 1/200s, ISO200, F??

macro setup - RR
first outdoor macro shots
The day after I bought my automatic extension tube off I went to the nearest park island here in my place. This park is a great place for outdoor photography because of the vast natural habitat that exists here. After I arrived I positioned myself near a row of flowers at the foot of the hill. I just stayed put and observe the plants around me and soon I found different insects hopping and flying around.
my auto extension tube
I checked online for the price of macro lenses and they are uber expensive. Some lenses cost more than my camera body. hahaha this is an expensive hobby.
Then I read about extension tubes. They say if you want to try your hands in macro photography and don’t want to invest in expensive lenses at first then buy an extension tube. They do the job at a lesser cost. But, yes, they have their trade-offs but for the low price (compared to macro lens) I don’t mind them.
Here is a more cheaper option than the Kenko auto extension tube. It is an extension tube with no electric contacts thereby the significantly reduced price. But this is not compatible with newer Nikon G-lenses (no aperture rings). Use this manual extension tube and you will be using only the smallest aperture opening of your G-lenses.
I will post soon on my first foray into “real” macro photography.







